Beckhoff Automation ep3754-0702

The EP3754-0702 EtherCAT Box has four analog multi-functional inputs, which can be extensively parameterized on an individual basis:   voltage measurement: ±5 mV to ±10 V, 0…10 V, 0…5 V current measurement: ±20 mA, 4…20 mA, 0…20 mA resistance measurement: 0…5 kΩ electrical resistance R in 2-/3-/4-wire connection RTD measurement in 2-/3-/4-wire connection potentiometer: min. 1 kΩ   The measured values are digitalized with a 16-bit resolution and transmitted electrically isolated to the higher-level automation device. The input filters and their associated conversion times are configurable in a wide range. The inputs can, if required, be scaled differently, and automatic limit value monitoring is also available. EtherCAT is used for parameterization purposes. The parameters are stored in the module.   The EP3754-0702 has three additional hexadecimal ID switches. In this way, an individual address from 0...4095 can be set, allowing unique identification regardless of installation position, as required by some device profiles for certain industries, such as the semiconductor industry.